Drill2Water, LLC
Water Well Drilling Rigs - Model Water-TCD                  tel: 512-944-7614
Model Water-TCD may change slightly in
appearance depending on options selected or
modifications requested by the customer.


Drill2Water, LLC
1308 Midmorning Drive
Austin, Texas  78737  USA
512-944-7614  office
866-812-9036  fax

Hours:  Mon-Fri: 9:00 am-4:00 pm CDT

(c) copyright  - All Rights Reserved
To convert well drilling
rig
Model Water-TCD to
a
Geothermal Drilling
Rig please add
$12,000.00 for the
purchase and
installation of mixer/grout
pump and tremie hose
reel, or save money by
supplying your grout
pump and tremie hose
reel to be installed.
Custom Well Drill Equipment
Borehole Drill Machine
Water Well Drilling Rigs photo
Model Water-TCD  -

Tophead rotary water well or geothermal
drilling rig with a
diesel powered hydraulic power unit.  

'Standard Equipment':
Diesel engine:  liquid cooled with control panel and safety interlocks
Hydraulic Reservoir:  30 gallon steel with 10 micron filtration
Forced Air Hydraulic Oil Cooler installed:  Yes
Hands Free Drilling:  Yes
Downward Pressure on Drill Bit Enabled:  Yes
Rig lift prevention safety relief installed:  Yes
Counter Balance Valve installed:  Yes
Hydraulic valve stack:    Pressure gauge with adjustable main relief bypass installed
Drill rotation fine speed feathering control installed:  Yes
Top-Head downward pressure fine speed feathering control installed:  Yes
Swivel threads:  2-3/8" Mayhew Junior  with subsaver
Swivel pressure rating:   750 psi (51.71 bar)
Wrenchless top pipe joint breakout installed:  Yes

Mast  structure:  Rectangular tubing with skid plate
Drill head Up/Down Drive system: Hydraulic motor direct ANSI chain drive     
Drill Pipe holding and bottom joint breakout lock installed:      Yes
Drill Pipe supplied: 250 feet or +/- 91 meters of 2-3/8" Mayhew Junior drill pipe
Drill Pipe Length: Standard drill pipe length is +/- three meters
Bit sub:  Bit sub is included
Mud pump:  Hydraulic Variable Speed Centrifugal pump with suction hose and foot
valve.

Trailer:  Custom manufactured 7' x 12' all steel 14,000 lb rated trailer with 12" I-beam
carriers and two 7000 lb axles.   Both axles equipped with electric brakes.  Trailer has
two rear and one front hydraulic operated leveling jacks.   Trailer has built in drill pipe
storage rack.   Trailer design may vary depending on the final shipping destination
Weight:   +/- 7,500 pounds / with Geothermal equipment weight is +/-8,500 pounds
Rig paint colors:  Yellow  and Black, Black and red, may vary.

Available Upgrades:
Borehole Downhole Hammer Capability for Drilling Granite or very hard rock:
1.  Air Option #1:   Includes high pressure swivel air line with shut off valve, high
pressure water injector pump with chemical feed, 4" downhole hammer and a 5"
downhole hammer bit.
2.   Mast Extension:  Hydraulic actuated mast extension for installation of casing in
20 foot or 6 meter lengths.  Includes hydraulic actuated winch for casing or drill pipe
handling and swing away drill head.
3.  High Pressure Piston Pump:  Pumps mud, grout or cement.
Geotechnical drilling equipment
Model Water-TCD shown with optional twin
piston mud pump (front red pump) and
associated high pressure lines (yellow lines).  
Special black rubberized coating and front
tongue toolbox is optional.

Standard color is Yellow with red swivel
Geothermal Drilling Rig with grout pump
Model Water-TCD  - Geothermal drill rig version.  
Shown with onboard grout pump/mixer and tremie
hose reel
This used truck with a mounted 425 cfm @ 175 psi used air compressor
and custom Model Water-TCD water well drilling rig is For Sale
.